Washtech M2C Professional Passthrough Dishwasher with Heat Recovery Unit – 500mm Rack

Washtech M2C Professional Passthrough Dishwasher with Heat Recovery Unit – 500mm Rack

The Washtech M2C is a heavy-duty passthrough dishwasher engineered for high-volume commercial kitchens that demand fast, consistent, and hygienic warewashing results. Its integrated heat recovery unit recycles energy from steam to preheat incoming water, eliminating the need for an external extraction canopy under adequate general ventilation conditions and reducing ongoing operating costs. With selectable 60, 120, and 180 second cycles and a wash capacity of up to 1,080 plates per hour, the M2C keeps clean ware flowing throughout even the most demanding service periods.

Built from heavy-duty stainless steel throughout, including the manifold and wash arms, the M2C combines a touchscreen control panel with a heads-up display, dual boilers with a dedicated rinse pump for assured sanitising rinse temperatures, and a two-stage stainless steel filtration system for consistently clean wash water. A soft-start 1.0HP wash pump, dual chemical dosing pumps, and a hands-free drainage system with sump and drain pump round out a specification designed for reliability and ease of use in professional environments.

Key Benefits

• Integrated heat recovery unit recycles steam energy to heat incoming water, cutting energy consumption and removing the requirement for a costly external extraction canopy where general ventilation is adequate
• Up to 1,080 plates per hour throughput with three selectable cycle times keeps warewashing matched to service pace
• Dual boilers plus a dedicated rinse pump deliver assured sanitising rinse temperatures on every cycle for food-safe results
• Touchscreen controls with a heads-up display simplify operation and allow staff to monitor machine status at a glance
• Two-stage stainless steel wash and drain filtration maintains wash water quality over extended service periods, protecting pump components and delivering consistently clean results
• Hands-free drainage with an integrated sump and drain pump reduces manual handling between cycles and supports a smooth, continuous workflow
• Soft-start 1.0HP wash pump minimises mechanical stress at start-up, supporting long-term reliability in high-cycle environments
• Compatible with 595mm to 640mm bench gaps, offering flexible installation across a range of kitchen configurations
• Supplied ready to operate with a 500mm dish rack, 500mm cup rack, cutlery container, and a full plumbing connection kit including water and chemical hoses

Key Features

• Integrated heat recovery unit recycles energy from steam to preheat incoming cold water supply
• No external extraction canopy required, subject to adequate general ventilation (full certification details available from SEED on request)
• Three selectable wash cycles: 60, 120, and 180 seconds
• Wash capacity up to 1,080 plates per hour
• 500mm rack size
• Compatible with bench gaps of 595mm to 640mm
• Touchscreen control panel with versatile heads-up display
• 1.0HP soft-start wash pump
• Dual chemical dosing pumps
• Dual boilers plus dedicated rinse pump for assured sanitising rinse performance
• Hands-free drainage system incorporating sump and drain pump
• Two-stage stainless steel wash and drain filtration system
• Heavy-duty stainless steel construction throughout, including manifold and wash arms
• Power supply: 415V, 3-phase (3P+N+E), 50Hz, 15A, 11.25kW
• Isolating switch must be positioned within 1m of the machine and not directly behind it
• Dimensions: 730mm wide x 710mm deep x 2025mm high
• Includes 1x 500mm dish rack (600 70028)
• Includes 1x 500mm cup rack (600 70029)
• Includes 1x cutlery container (C660503)
• Includes 1x plumbing connection kit (water and chemical hoses)
• Backed by Moffat's 5-2-2 warranty: 5 years cabinet parts only, 2 years wash pump, 2 years parts and labour

Specifications

• Width (mm): 730
• Depth (mm): 710
• Height (mm): 2025