Washtech Alc Professional High Capacity Insulated Passthrough Dishwasher with Heat Recovery Unit – 600mm Rack

Washtech ALC Professional High Capacity Insulated Passthrough Dishwasher with Heat Recovery Unit – 600mm Rack

The Washtech ALC is a heavy-duty passthrough dishwasher engineered for high-volume commercial kitchens that demand consistent, hygienic results without slowing service. Its integrated heat recovery unit captures steam energy and uses it to warm incoming cold water, eliminating the need for a separate canopy and reducing overall energy consumption. With selectable 50, 70 and 100 second cycles and a throughput of up to 1584 plates per hour, the ALC is built to keep clean ware flowing through the busiest shifts.

Constructed from heavy-duty stainless steel throughout, the ALC features an insulated front hood, dual chemical pumps, a 1.5HP soft-start wash pump, and separate stainless-steel wash arms and rinse arms delivering thorough, reliable cleaning every cycle. Touchscreen controls can be mounted on either side of the machine, under a bench or on a wall for flexible installation, while the filtration system combining two stages of stainless-steel wash and drain screening alongside hands-free drainage keeps operation efficient and hygienic. The unit ships with a comprehensive rack and accessory kit, ready to integrate into a professional warewashing station.

Key Benefits

• Achieves a throughput of up to 1584 plates per hour, sustaining clean ware supply during the most demanding service periods.
• The integrated heat recovery unit diverts steam energy back into the water supply to warm incoming cold water, cutting running costs and removing the requirement for a dedicated ventilation canopy.
• Three operator-selectable cycle times of 50, 70 and 100 seconds allow staff to balance speed and wash intensity to suit the load.
• Each cycle uses just 2.4 litres of cold water, keeping utility costs and environmental impact low.
• The touchscreen control panel is supplied with a bracket that allows fitting to either side of the machine, beneath a bench or wall-mounted, adapting to virtually any kitchen layout.
• A 1.5HP soft-start wash pump reduces mechanical stress and power draw at startup, supporting long-term reliability.
• A stainless-steel filtration arrangement covering both wash and drain stages in sequence, combined with hands-free drainage, simplifies daily cleaning and maintenance.
• The insulated front hood and fully insulated construction limit heat and noise transfer into the surrounding kitchen environment.
• Included accessories comprising a GN tray rack, dish rack, cup rack, cutlery container and a plumbing connection kit with water and chemical hoses mean the machine is ready to run from day one.

Key Features

• Integrated heat recovery unit that diverts steam energy to pre-heat the incoming water supply; no separate canopy required (subject to adequate general ventilation).
• Selectable wash cycles of 50, 70 and 100 seconds to suit varying load types and throughput requirements.
• Maximum capacity of 1584 plates per hour.
• Rack compatibility: 600 x 500mm racks accommodating GN pans or up to 22 plates per rack.
• Cold water draw of 2.4 litres per cycle.
• Touchscreen control panel with mounting bracket enabling installation on either side of the machine, beneath a bench or on a wall.
• 1.5HP soft-start wash pump for reduced mechanical wear and lower startup power demand.
• Dedicated stainless-steel wash arms and rinse arms operating independently for consistent spray coverage across every cycle.
• Dual chemical pumps for simultaneous detergent and rinse-aid dosing.
• Hands-free drainage system for convenient, hygienic operation.
• Sequential two-stage filtration in stainless steel covering both the wash and drain circuits.
• Insulated front hood to minimise heat and steam transfer into the kitchen.
• Heavy-duty stainless-steel construction and stainless-steel manifold throughout.
• 3-phase power supply: 415V / 3P+N+E / 50Hz / 15A / 12.3kW.
• Isolating switch must be positioned within 1 metre of the machine and not directly behind it.
• Includes: 1x 600mm GN tray rack, 1x 500mm dish rack, 1x 500mm cup rack, 1x cutlery container and 1x plumbing connection kit containing water and chemical hoses.
• 5-2-2 warranty: 5 years cabinet parts only, 2 years wash pump parts and labour, 2 years parts and labour.
• Dimensions: 775mm wide x 710mm deep x 2025mm high.

Specifications

• Width (mm): 775
• Depth (mm): 710
• Height (mm): 2020