Mareno CP98E M1 90 SERIES Double well Electric pasta cooker 42 plus 42 Litre water cap

Mareno CP98E M1 90 Series Double Well Electric Pasta Cooker 42+42 Litre

The Mareno CP98E is a freestanding commercial electric pasta cooker from the 90 Series, featuring two independent wells with a combined water capacity of 42+42 litres. Built for high-volume foodservice, it is constructed throughout in AISI 304 stainless steel with a 20/10 pressed steel top that includes an anti-spill front edge and a perimeter well with a wide expansion zone to manage foam during continuous service.

Each deep-drawn tank is fabricated from polished AISI 316 stainless steel with a radiused bottom for straightforward cleaning, and is heated by armoured immersion-type elements that fold away to allow full tank access. Water filling is controlled via a ball valve with fine flow-rate adjustment, and drainage is handled by an accessible tap located in the lower cabinet, making the unit practical and efficient to operate across a busy service period.

Key Benefits

• Dual independent 42-litre wells allow two different pasta types or quantities to be cooked simultaneously, maximising throughput during peak service.
• Rapid water recovery between basket loads ensures consistent cooking times and quality when working back-to-back through service.
• The energy regulator provides precise boiling control and allows a low-energy stand-by position, reducing running costs during quieter periods.
• Foldable immersion heating elements make thorough tank cleaning faster and more practical at the end of service.
• A pressure switch safety mechanism prevents the heating elements from activating if the tank is empty, protecting both the equipment and kitchen staff.
• IPX5 water-resistant rating makes the unit suitable for the wet, high-pressure cleaning environments typical of commercial kitchens.
• The water tap is positioned in a protected zone to minimise the risk of accidental impact damage during busy service.
• Stainless steel adjustable feet allow the unit to be levelled on uneven floors and facilitate cleaning underneath.
• The top surface is designed for flush alignment with adjacent equipment and is supplied with a hermetic seal, supporting a clean, integrated bench run.

Key Features

• Freestanding construction in AISI 304 stainless steel throughout.
• 20/10 pressed steel top with anti-spill front edge to contain overflow.
• Perimeter well on top surface with wide expansion zone to manage foam.
• Top designed for flush alignment with adjoining equipment; hermetic seal supplied.
• Two deep-drawn tanks in polished AISI 316 stainless steel with radiused bottoms for ease of cleaning.
• Combined tank capacity of 42+42 litres; individual tank dimensions 305 x 510 x 285 mm (H).
• Armoured immersion-type heating elements that fold down to facilitate full tank cleaning.
• Water filling via ball valve with fine flow-rate adjustment.
• Water tap positioned in a protected zone to guard against accidental impact.
• Energy regulator for effective boiling control and energy saving in stand-by mode.
• Heat control knob shaped to prevent water infiltration, with integral indicator lights showing heating status and correct appliance operation.
• Water drainage via an accessible tap located in the lower cabinet.
• Pressure switch safety device prevents heating activation when the tank is empty.
• IPX5 water-resistant rating.
• Stainless steel adjustable feet.

Specifications

• Weight (kg): 70