Dipo DWU05 Under Counter LAVA Induction warmer

Dipo DWU05 Under Counter LAVA Induction Warmer

The Dipo DWU05 is an under-counter LAVA induction warmer designed to mount flush to the underside of stone, quartz, ceramic or concrete benchtops between 10 and 30 mm thick, transmitting the induction field directly through the bench surface to any induction-compatible vessel placed on top. There are no throw rings or surface markings required, keeping your buffet or servery presentation completely clean and uncluttered. Made in South Korea and running on a standard 10 A plug at 500 W, it is a discreet, energy-efficient solution for maintaining consistent food holding temperatures throughout service.

A patented, highly reliable circuit board enables continuous operation for up to 12 hours, making the DWU05 well suited to extended buffet service periods. Dynamic pan sensing detects induction-compatible cookware between 130 and 240 mm in diameter, allows up to 10 mm of pan separation before cutting power, and restores power within approximately 0.5 seconds once the vessel re-enters the magnetic field. A separate LED controller with 7 simmer and holding settings gives staff straightforward temperature management, while automatic over-temperature shut-off protects the unit and cookware. Note that the SS3195 stainless steel mounting bracket is required for installation and must be ordered separately. A minimum of 100 mm clearance is needed at both the front and rear below the unit for adequate airflow.

Key Benefits

• Completely hidden beneath the benchtop, eliminating visible equipment on the buffet surface for a professional, streamlined presentation.
• Transmits induction energy through the bench surface without throw rings, so induction-ready vessels sit directly on the existing stone or ceramic top.
• Engineered for continuous 12-hour operation, covering full-day buffet or service periods without interruption.
• Dynamic pan sensing restores power in roughly 0.5 seconds after a vessel is repositioned, reducing energy waste and maintaining food temperature without delay.
• Seven simmer and holding settings give staff precise control over product temperature throughout the service period.
• 500 W energy-efficient operation reduces running costs compared to traditional chafing fuel or conventional heating methods during long buffet sessions.
• Compatible with new or existing benching in stone, quartz, ceramic or concrete, making it a practical retrofit option as well as a new-build choice.
• Automatic over-temperature shut-off protects both cookware and the unit, reducing the risk of damage and downtime during busy service.
• Standard 10 A plug requires no specialist electrical fit-out, simplifying installation in most commercial kitchen and front-of-house environments.

Key Features

• Under-counter induction warmer that mounts flush to the underside of the bench using the SS3195 stainless steel bracket (must be ordered separately).
• Compatible bench surfaces: stone, quartz, ceramic and concrete with thickness between 10 and 30 mm.
• Induction field transmits through the bench surface directly to the vessel; no throw rings or surface modifications required.
• Patented, highly reliable circuit board rated for up to 12 hours of continuous operation.
• Dynamic pan sensing technology detects induction-compatible cookware and allows up to 10 mm of pan separation before cutting power.
• Power restores in approximately 0.5 seconds once a vessel re-enters the magnetic field.
• Suitable cookware diameter: 130 to 240 mm.
• 7 simmer and holding settings for flexible temperature management.
• Separate LED display controller, mounted independently from the warmer unit.
• Automatic over-temperature shut-off for protection of cookware and the unit.
• NEG glass (manufactured in Japan) used for the glass surface, providing high resistance to impact from cookware.
• 500 W power output; draws 2.2 A.
• Standard 10 A plug; no specialist electrical installation required.
• Requires a minimum of 100 mm clearance at both the front and rear below the unit to maintain adequate airflow.
• Suitable for use with new builds or integration into existing benching.
• Manufactured in South Korea.
• Dimensions: 296 mm wide x 370 mm deep x 80 mm high.
• Weight: 5 kg.

Specifications

• Width (mm): 296
• Depth (mm): 370
• Height (mm): 80
• Weight (kg): 5
• Shipping Weight: 5
• Shipping Cubic: 0.032
• Packed Width (mm): 300.0
• Packed Height (mm): 100.0
• Packed Depth (mm): 380.0
• Power Delivery: 500w
• Warranty (months): 12 months
• Country of Origin: South Korea
• Australian Made Logo: NO