Thermaster SCB/21 three door DELUXE Sandwich Bar

Thermaster SCB/21 Three Door Deluxe Sandwich Bar

The Thermaster SCB/21 is a three door deluxe sandwich bar designed for high-volume commercial kitchens, sandwich shops, cafes and delis that demand reliable refrigerated prep space. Spanning 2180mm wide with a gross volume of 1000 litres, the unit accommodates 11 x 1/3 pans in an enclosed blown well with cross-flow pan cooling, maintaining a consistent temperature range of 2 to 8°C. The contemporary square stainless steel front gives it a clean, modern profile that suits front-of-house and back-of-house environments alike.

Built with stainless steel on both the interior and exterior, the SCB/21 features rounded internal corners for straightforward sanitation and a 230mm deep rear working area complete with an included PE cutting board at a practical bench height of 855mm. Secop compressors and German EBM-Papst fans power the fan-forced evaporator cooling, while auto defrost and self-evaporating drainage minimise maintenance demands. The refrigeration unit is completely removable for servicing, and integrated castors allow the unit to be repositioned with ease.

Key Benefits

• Cross-flow pan cooling within the blown well keeps all 11 x 1/3 pans at a safe 2 to 8°C, protecting ingredient freshness throughout a busy service.
• The enclosed pan area with easy-slide Perspex covers locks in temperature and reduces product exposure, helping maintain food safety compliance.
• A 230mm deep rear working area with an included PE cutting board gives prep staff a dedicated, hygienic surface without needing a separate bench.
• Rounded internal corners throughout the stainless steel interior make thorough cleaning faster and more effective, reducing cross-contamination risk.
• Auto defrost and self-evaporating drainage eliminate manual defrost cycles and standing water, keeping daily maintenance to a minimum.
• The completely removable refrigeration unit simplifies servicing and reduces downtime when maintenance is required.
• German EBM-Papst fans and Secop compressors deliver dependable, energy-efficient performance under continuous commercial operating conditions.
• Integrated castors allow straightforward repositioning during kitchen cleans or layout changes without requiring additional equipment.
• A generous 1000 litre gross volume across three doors provides ample storage for pre-chilled ingredients alongside active prep, supporting high-throughput operations.

Key Features

• Accommodates 11 x 1/3 pans (pans not included)
• Stainless steel interior and exterior construction
• Gross volume: 1000 litres
• Temperature range: 2 to 8°C
• Blown well design with cross-flow pan cooling
• Enclosed pan area with easy-slide Perspex covers (covers must be in place to maintain correct operating temperature)
• Modern square stainless steel front profile
• Fridge compartment fitted with one level of shelving plus a floor
• 230mm deep rear working area
• PE cutting board included
• Bench height: 855mm
• Rounded internal corners for hygiene and easy cleaning
• Secop compressors
• German EBM-Papst fans
• Digital temperature control and read-out
• Fan-forced evaporator cooling
• Auto defrost
• Self-evaporating drainage
• Refrigerant: R404a (SCB/21)
• Completely removable refrigeration unit for easy servicing
• Integrated castors for mobility
• Three hinged doors
• 240V power supply
• Dimensions: 2180mm (W) x 700mm (D) x 1255mm (H)
• Note: unit tops are holding areas only; product must be pre-chilled to below 5°C before filling
• Warranty: 2 years parts and labour plus 2 years parts only, with product registration within 14 days of invoice

Specifications

• Width (mm): 2180
• Depth (mm): 700
• Height (mm): 1255
• Weight (kg): 226
• Packed Width (mm): 770
• Packed Depth (mm): 2230
• Packed Height (mm): 1420
• Shipping Weight: 176
• No. of Doors: 3
• Door Type: Hinged Doors
• Body Material: Stainless Steel
• Mobility: Castors/Wheels
• Defrost Type: Auto
• Cooling Type: Fan Forced
• Power Delivery: 240V; 480W
• Power (kW): 240
• Warranty (months): 2 Years Parts and Labour + 2 Years Parts Only for Products Registered within 14 Days of Invoice