Modular Systems SSB6-2400L/A Single Left Sink Bench with Pot Undershelf

Modular Systems SSB6-2400L/A Single Left Sink Bench with Pot Undershelf 2400mm

The Modular Systems SSB6-2400L/A is a 2400mm wide all-stainless-steel sink bench featuring a single left-positioned bowl and a sturdy pot undershelf, purpose-built for the rigorous demands of commercial kitchens, restaurants, cafés, and catering operations. Constructed throughout from 1.2mm SUS304 (18/8) stainless steel, every component from the fully welded, polished bowl to the reinforced benchtop and tubular undershelf is engineered for lasting hygiene and structural reliability in high-volume food service environments.

Supplied flat-packed for straightforward transport and site delivery, the SSB6-2400L/A is specially designed for quick and simple assembly and arrives complete with an instruction manual and all necessary tools. An optional leg brace can be substituted for the pot shelf at no extra cost, simply specify at the time of ordering. Lockable castor kits are also available separately, and the 2400mm wide configuration is supported by six legs for enhanced stability.

Key Benefits

• Fully welded, polished bowl interior and exterior provides a seamless, easy-to-clean hygienic surface that supports compliance with commercial food safety standards.
• XPS-board-lined benchtop combined with SUS304 stainless steel panel and 'U' channel reinforcements delivers a rigid, impact-resistant work surface that resists warping under heavy loads.
• 15mm wet edge around the bowl perimeter contains water and reduces spillage onto the surrounding work surface, keeping the bench safer and cleaner during busy service.
• Fully adjustable polished stainless steel disc feet compensate for uneven floors, ensuring a stable, wobble-free setup straight out of the box.
• Flat-packed delivery with included tools and instruction manual makes assembly fast and practical, minimising downtime when equipping or refitting a kitchen.
• Six-leg configuration on this 2400mm model provides extra load-bearing support compared with standard four-leg benches, making it suitable for heavy pots and equipment.
• Optional lockable castor kits allow the bench to be repositioned for cleaning or reconfiguration, adding operational flexibility without compromising stability during use.
• Free optional leg brace (in place of the pot shelf) is available to order, giving operators the choice of an open base for easier cleaning or a solid brace for maximum rigidity.
• Two-year parts-only warranty provides peace of mind and reflects the durable, commercial-grade construction of the unit.

Key Features

• Overall dimensions: 2400mm wide x 600mm deep x 900mm high
• Single bowl positioned on the left side of the bench; centre bowl positioning within the left section
• Bowl size: 400mm wide x 400mm deep x 300mm high
• 90mm diameter drain hole
• Bowls fully welded and polished inside and out for hygienic, crevice-free cleaning
• 15mm wet edge to contain water at the bowl surround
• All stainless steel construction throughout; 1.2mm S/S material
• Benchtop material: 1.2mm SUS304 (18/8) stainless steel
• Benchtop lined with 15mm thick XPS board and stainless steel panel for rigidity and insulation
• Special stainless steel 'U' channel reinforcements under the benchtop ripple surface; number of channels increases with bench width
• Splashback: stainless steel backed, 150mm high, 40mm thick, bevelled and fully enclosed
• Legs: 1.2mm S/S, 42mm diameter tube
• Six legs supplied with this 2400mm wide model for increased load-bearing support
• Fully adjustable polished stainless steel disc feet that match the leg finish
• Lockable castor kits available as an optional accessory
• Pot undershelf: 1.2mm S/S (18/8); outer frame tubes 38mm diameter x 1.2mm wall; inner tubes 25mm diameter x 1mm wall with 40mm spacing
• Free optional leg brace available as a substitute for the pot undershelf (must be specified at time of order)
• Supplied flat-packed for ease of transport; includes instruction manual and assembly tools
• Specially designed for quick and simple on-site assembly
• 2 years parts-only warranty

Specifications

• Width (mm): 2400
• Depth (mm): 700
• Height (mm): 900
• Weight (kg): 68.8
• Packed Width (mm): 670
• Packed Depth (mm): 2470
• Packed Height (mm): 530
• Shipping Weight: 45
• Warranty (months): 2 Years Parts Only
• Capacity (Litres): 1200
• Splash Back: 150 mm high and 30 mm thick