LUUS PC-45 Pasta Cooker Pc 45 450Mm 6 Basket - 450 x 800 x 1100mm

LUUS PC-45 Commercial Gas Pasta Cooker | 450mm | 6 Basket | 35L Tank

The LUUS PC-45 is a 450mm wide freestanding commercial gas pasta cooker engineered for high-volume pasta production in professional kitchens. Built in Australia to rigorous standards, it features a 35-litre marine grade 316 stainless steel tank, an adjustable thermostat for precise water temperature control, and an auto-skimming water overflow system that continuously removes excess starch to keep cooking water clean through a busy service.

Supplied with six 304 stainless steel perforated baskets and a drain-back basket stand, the PC-45 delivers rapid water recovery for back-to-back batch cooking without quality loss. Safety features include a piezo ignition with flame failure device, a high-temperature cut-out mechanism, and a safety release tank drainage valve. The unit accepts both natural gas and LPG, ships with a gas regulator, and carries a 24-month warranty when registered within 30 days of purchase.

Key Benefits

• Auto-skimming overflow system removes starch build-up continuously, keeping water cleaner for longer and producing more consistent pasta results across an entire service.
• Rapid water recovery between batches allows back-to-back basket cooking at volume without delays or quality degradation.
• Adjustable thermostat gives kitchen staff precise control over water temperature, reducing overcooking and waste during busy periods.
• Six included baskets enable multiple pasta varieties or portion sizes to be prepared simultaneously or in quick succession.
• Marine grade 316 stainless steel tank resists corrosion from constant hot water contact, extending the working life of the unit in demanding commercial environments.
• Fiberfrax Durablanket insulation on both sides of the tank improves fuel efficiency and reduces heat loss to the surrounding kitchen.
• Front-panel controls and full front-access serviceability reduce downtime during maintenance and make operation straightforward for all kitchen staff.
• Safety release drainage valve at the base of the unit allows fast, safe emptying of the tank at the end of service.
• Rear castors and stainless steel front legs provide stable placement while allowing the unit to be repositioned for cleaning or reconfiguration.

Key Features

• 450mm wide freestanding or benchtop installation footprint (450W x 800D x 1100H mm)
• 35-litre marine grade 1.5mm 316 stainless steel tank for maximum corrosion resistance
• 63 MJ jet burner with piezo ignition, pilot flame, and flame failure device (FFD)
• Accepts natural gas (rated 60 MJ) or LPG (rated 60 MJ); 3/4" BSP male gas connection
• Supplied with gas regulator (specify natural gas or LPG at time of order)
• Adjustable thermostat for accurate water temperature control
• Auto-skimming water overflow system removes excess starch during cooking to purify water
• High-temperature cut-out safety mechanism
• Safety release tank drainage valve positioned at the bottom of the unit
• Fiberfrax Durablanket insulation applied to both sides of the tank
• Includes 6 x 0.7mm 304 stainless steel perforated baskets
• Drain-back basket stand in 1.2mm 304 stainless steel
• Tank filter insert in 0.9mm 304 stainless steel
• Rear laundry arm with controls located on the front panel for ease of operation
• Welded 1.2mm 304 stainless steel front hob
• Front and side panels in 0.9mm 304 stainless steel
• Splashback in 1.2mm 304 stainless steel
• Door constructed from 0.9mm 304 stainless steel
• Rear castors and stainless steel legs at front for stable, manoeuvrable placement
• Water inlet: 1/2" copper tube connection (60mm from left, 70mm from rear, 80mm from floor)
• Drain: 1" BSP male connection (225mm from left, 210mm from front, 220mm from floor)
• Gas connection located 180mm from right, 70mm from rear, 150mm from floor
• Full front access to all parts and components for easier servicing and cleaning
• Removable baskets and tank filter insert for straightforward cleaning
• Manufactured in Australia
• 24-month warranty (includes 12 months standard plus 12 months additional upon registration at luus.com.au within 30 days of purchase)

Specifications

• Width (mm): 450
• Depth (mm): 800
• Height (mm): 1100
• Weight (kg): 74
• Colour: LUUS Professional
• Gas Type: LPG|Natural Gas
• Gas Connection: 3/4" BSP Male
• Burner Output (MJ/h): 52
• Ignition Type: Piezo with Flame Failure Device
• Material: Australia
• Country of Origin: Australia
• Warranty (months): 24
• Installation Type: Freestanding / Benchtop
• Control Type: Manual
• Voltage/Phase: N/A (Gas)
• Power Rating: Stainless Steel
• Power Supply: N/A (Gas)
• Fuel Type: Gas
• Number of Burners: 1