LUUS CS-3P3C Griddles Cs 3P3C 600Mm 300 Grill 300 Bbq - 600 x 800 x 1100mm

LUUS CS-3P3C Combination Griddle & Chargrill – 600mm Freestanding Commercial Cooking Range

The LUUS CS-3P3C is a 600mm wide freestanding commercial range that pairs a 300mm mild steel griddle hotplate with a 300mm cast-iron chargrill and barbecue section, delivering a combined 51 MJ/h total gas input suited to high-throughput short-order cooking. The unit is manufactured in Australia from heavy-duty 304 stainless steel and is built to handle the continuous demands of busy commercial kitchens, with front-access servicing and straightforward daily clean-down built into the design.

Each cooking zone operates independently, with its own pilot, flame failure device, piezo ignition starter and steplessly adjustable flame control that includes a low-flame setting, giving operators precise temperature management across both surfaces at once. The unit arrives ready for natural gas or LPG connection via a 3/4" BSP male fitting and ships with a gas regulator included, making installation straightforward on the day.

Key Benefits

• Dual cooking surfaces allow simultaneous griddling of proteins and chargrilling of vegetables or skewers, maximising output from a single 600mm footprint.
• Each zone has its own independently adjustable flame control, enabling precise heat management across both surfaces during busy service periods and reducing the risk of overcooking.
• The 21mm thick mild steel griddle plate retains heat effectively when cold product is loaded, sustaining cooking temperature under continuous demand.
• Cast-iron heat-distributing hoods on the chargrill section spread radiant heat evenly across the 280mm x 520mm barbecue surface for consistent char marks.
• Front-facing grease channels, removable burner hoods, spillage bowls and a secondary undertray simplify end-of-service cleaning and reduce downtime.
• Four stainless steel legs incorporate a 55mm vertical adjustment range, making it straightforward to level the unit on uneven floors and align it with adjacent equipment.
• All components and gas connections are accessible from the front of the unit, allowing servicing and maintenance without moving the range.
• A gas regulator compatible with natural gas or LPG is included in the box, removing additional procurement steps on installation day.
• A two-year warranty applies when the product is registered at luus.com.au within 30 days of the purchase date, reflecting confidence in the Australian-made build quality.

Key Features

• Griddle section: 16mm thick mild steel hotplate with a 290mm x 540mm cooking surface (0.16 m² cooking area) and top weld-sealed hotplate sections
• Griddle burner: 18 MJ/h output; equipped with a pilot burner, flame failure device (FFD) and piezo ignition starter; continuously adjustable flame control valve with a low-flame position
• Chargrill/barbecue section: two-part burner assembly featuring a cast-iron heat-distributing hood; 280mm x 520mm cooking surface (0.15 m² cooking area)
• Chargrill burner: 33 MJ/h output; equipped with a pilot burner, flame failure device (FFD) and piezo ignition starter; continuously adjustable flame control valve with a low-flame position
• Total gas input: 51 MJ/h (rated equally for natural gas and LPG)
• Gas connection: 3/4" BSP male fitting, positioned 180mm from the right, 50mm from the rear and 600mm from the floor
• Includes a gas regulator (specify natural gas or LPG at time of order)
• Front hob: welded 1.2mm 304 stainless steel construction
• Exterior cladding: front panels in 0.9mm 304 stainless steel; side panels in 0.9mm 304 stainless steel
• Splashback: 1.2mm 304 stainless steel
• Splash guards on both cooking zones: 2mm 304 stainless steel
• Griddle oil/grease bin: 1.2mm stainless steel
• Chargrill undertray: 0.9mm stainless steel
• Secondary undertray beneath the unit to capture additional waste
• Removable burner hoods and spillage bowls for thorough cleaning access
• Four stainless steel legs with 55mm of vertical height adjustment
• Freestanding installation; also suitable for benchtop use
• Overall dimensions: 600mm wide x 800mm deep x 1100mm high
• Weight: 82 kg
• Country of manufacture: Australia
• 2-year warranty (1 year standard plus 1 additional year when the product is registered at luus.com.au/warranty-registration no later than 30 days after the date of purchase)

Specifications

• Width (mm): 600
• Depth (mm): 800
• Height (mm): 1100
• Weight (kg): 82
• Colour: LUUS Professional
• Gas Type: LPG|Natural Gas
• Gas Connection: 3/4" BSP Male
• Burner Output (MJ/h): 51
• Ignition Type: Piezo with Flame Failure Device
• Material: Australia
• Country of Origin: Australia
• Warranty (months): 24
• Installation Type: Freestanding / Benchtop
• Control Type: Variable Flame Control
• Voltage/Phase: N/A (Gas)
• Power Rating: Stainless Steel
• Power Supply: N/A (Gas)
• Fuel Type: Gas
• Number of Burners: 2
• Griddle Plate Thickness (mm): 21
• Griddle Surface: Smooth Mild Steel / Cast Iron Grates