Eswood ES150 Rack Conveyor Warewasher

Eswood ES150 Rack Conveyor Warewasher

The Eswood ES150 is a high-capacity rack conveyor warewasher built for demanding commercial dishrooms, capable of handling up to 150 racks per hour at operator-selectable conveyor speeds of 100 or 150 racks per hour. It is sized to meet the throughput demands of clubs, function centres, reception venues, hotel bistro-restaurants, and mid-scale hospitals, pairing a robust continuous conveyor system with powerful wash and rinse heating to sustain hygiene standards under prolonged peak loads.

The ES150 meets FSANZ safe food codes and carries both HACCP and WaterMark certifications. All electrical control gear sits in a top-mounted panel well clear of water splashes and positioned for straightforward servicing access. Complete front and side panelling protects motors and drive components whenever the dishroom is being hosed down, and a comprehensive set of safety interlocks safeguards both operators and the machine itself.

Key Benefits

• Delivers throughput of up to 150 racks per hour at selectable conveyor speeds, sustaining consistent output during peak service in high-volume catering environments.
• HACCP and WaterMark certified, supporting compliance with FSANZ safe food codes and simplifying inspections by health authorities.
• Digital temperature displays for wash and rinse cycles give operators real-time hygiene visibility and straightforward data for HACCP record-keeping.
• Operation is interlocked to rinse temperature, guaranteeing every rack exits at the correct sanitising temperature without depending on operator judgement.
• Clutch-controlled conveyor drive absorbs shock loads when racks jam, shielding the drive mechanism and lowering the risk of expensive mechanical failures.
• Full front and side panelling guards motors and electrical components against water ingress during routine dishroom washdowns, extending the service life of key components.
• The rinse economiser holds rinse water delivery to a precise volume regardless of variations in incoming supply pressure, improving both water efficiency and rinse consistency.
• Low-water protection on wash tank elements prevents burnout during the filling cycle or under low-supply conditions, minimising unplanned downtime.
• An optional range of accessories, including blower dryers, acoustic insulating panels, a rinse pressure booster pump, extension hoods with ventilation spigots at the feed and discharge ends, an angled feed unit, and a discharge bench proximity trip switch factory-wired to the control box, allows the machine to be tailored to specific dishroom layouts and throughput requirements.

Key Features

• Capacity up to 150 racks per hour; operator-selectable conveyor speed of 100 or 150 racks per hour.
• Top-mounted control panel housing start/stop controls, electronic temperature control, and digital displays for both wash and rinse temperatures, located away from water splash and readily accessible for servicing.
• All electrical control gear consolidated at the top of the machine, isolated from water splash.
• Machine operation interlocked to rinse temperature, ensuring sanitising conditions are confirmed before the conveyor can run.
• Clutch-controlled conveyor drive with a 180 W motor, protecting the drive mechanism if racks become jammed.
• Door safety switches disable operation whenever the doors are open.
• Fully panelled front and sides to shield motors and drive components from water splash during dishroom cleaning.
• Wash pump rated at 2.0 kW with a flow capacity of 900 litres per minute.
• Wash tank capacity of 87 litres; wash temperature range 60 to 65°C.
• Wash tank water heater rated at 9.0 kW; wash and rinse elements each fitted with individual thermostats.
• Integral rinse booster heater rated at 12.0 kW; rinse cylinder capacity of 14 litres.
• Minimum rinse temperature of 82°C for effective sanitisation.
• Rinse economiser factory set to deliver a fixed rinse water volume independently of incoming supply pressure fluctuations.
• Low-water protection fitted to wash tank elements to prevent damage during filling or low-supply conditions.
• Optional accessories include blower dryers, acoustic and thermal insulating panels, a rinse pressure booster pump, extension hoods with ventilation spigots positioned at the feed and discharge ends, an angled feed unit, and a discharge bench proximity trip switch pre-wired into the control box.

Specifications

• Width (mm): 1700
• Depth (mm): 730
• Height (mm): 1600
• Weight (kg): 250
• Colour: Stainless Steel
• Gas Connection: N/A (Electric)
• Water Consumption: 400 Litres per hour Maximum
• Hot Water Inlet: 1/2" BSP
• Shipping Weight: 250
• Packed Width (mm): 2000
• Packed Height (mm): 1480.0
• Packed Depth (mm): 1000
• Shipping Cubic: 2.960000000m3
• Capacity (Litres): 100-150 racks/hr
• Power / Gas Input: 24.2 kW
• Power Supply: 400V 3ph
• Power Rating: 24.2kW|415V/50Hz/3N
• Voltage/Phase: 415V/50Hz/3N
• Power (kW): 24.2
• Country of Origin: Australia (Made)
• Warranty (months): 24.0
• Material: Stainless Steel
• Installation Type: Electric
• Control Type: Electronic
• Fuel Type: Electric